Product Description

Specifications of Cree LED Canopy lights in the picture

High Brightness, low decay LED to ensure good performance, safety working current to ensure long life span of LED.
 
Power Supply (driver) features:
TaiwanMean Well driverwhich meet international standard (Maximum AC**5V)
When load>*5%, Power Factor is more than 0.9; IP Class is IP*6.
Their protection function are short-circuit, overload, over voltage, over heat, etc. Built-in current limiting circuit, so that output voltage and current can be adjustable. Built-in active power factor correction function to ensure power efficiency.
 
Heat sink features:
Extruding with high quality alloy extrusion and progressing with special spray; panel use waterproof optical lens, so that its feature is salinity resistance and high light transmittance.
 
Energy saving:
*0W LED high bay light can replace **0W HPS light; it can save *5% electricity.
 
Application:
Suitable for petroleum chemical factory, gas station, national defense construction and other inflammable and explosive places.
 

Lamp’s Initial Luminous Flux: ***0lm

Total Input Power: *0W

Light decay rate after LED Lamp runs for ***0hours: =0.9

Color Temperature: 5, **0K or ***0K

Color of Light: Daylight White or warm white

Color Rendering Index: *0

Expected Life Span: *0, **0 Hours

Net weight : 9Kgs

Applications: Shopping Mall, Underground Parking Lot, Schools, Offices, Gas Station, Toll Stations, Factories, Warehouses, Indoor Stadiums, Gyms… …

Installation method: Canopy Recessed Mounted
5. Installation instruction:
1. Drill 4pcs dia.8mm hole with *5mm depth on ceiling, put the expansion screws into the drilled hole, fasten the plates with nuts to the wall.
2. Storage at normal temperature.
3. Keep good sealing in wire connection to avoid electric leakage.
4. Adopt waterproof measures during installation.
5. The lamp can’t be used in violation of any fire regulations.
6. Please look for professional electrician to install. Connection for three-core cable: red is for
fire wire, blue is for null line, yellow is for ground wire.
 7. Input voltage: AC******5V ****0HZ, do not exceed voltage and frequency range.
8. Please take the whole light gently during delivery and storage.
7. Maintenance instructions:
1. Make sure cut power before maintenance.
2. Regularly clean the lens to make good transmission of light.
3. Regularly clean housing and heat sink to make sure good heat dissipation.
4. Do not use water or highly corrosive solution for cleaning, had better use dry cloth.
 
8. Warranty &After-sales service:
Warranty: *-Year for the whole light.
Warranty is based on correct storage, installation, using and maintenance.
Damage for misuse or false operation does not in guarantee.
During guarantee period, our company will chose repair or change new parts for customers.
Exceed guarantee period, our company will charge cost for material and labor cost.